F&C Sensing Technology (Hunan) Co.,Ltd
F&C Sensing Technology (Hunan) Co., Ltd. F&C Sensors, Sensing Future
Add to Cart
Definition
For retro-reflective sensors the transmitter and receiver are incorporated into one housing.
By means of a reflector the transmitted light is returned to the receiver, it is usually 2m sensing distance, and HR series reaches 4m.
Advantages
1. Imported electronic components and flexible soft wire.
2. Much experience of OEM, ODM.
3. Compete with big brand,25 years+ experience in sensor field and 10+ years OEM experience
4. One-stop services. around 5000 models for choice, including fiber optical sensors, proximity sensors, photoelectric switches.
DR18 series model (NPN type also no problem)
| Model | Output design | Sensing Distance |
| DR18RI-S10P R2M | PNP NO | 100mm |
| DR18RI-S10PC R2M | PNP NO NC | 100mm |
| DR18RI-S40P R2M | PNP NO | 400mm |
| DR18RI-S40PC R2M | PNP NO NC | 400mm |
| DR18MR-S200P R2M | PNP NO | 2m |
| DR18MR-S200PC R2M | PNP NO NC | 2m |
| DR18TI-S500P R2M | PNP NO | 5m |
| DR18TI-S500PC R2M | PNP NO NC | 5m |
| DR18TI-S1000P R2M | PNP NO | 10m |
| DR18TI-S1000PC R2M | PNP NO NC | 10m |
| NPN NO.NC | DR18RI-S40NC R2M | DR18MR-S200NC R2M | DR18TI-S500NC R2M |
| PNPNO.NC | DR18RI-S40PC R2M | DR18MR-S200PC R2M | DR18TI-S500PC R2M |
| Detection Type | Diffuse | retro-reflective | Through-beam |
| Standard Detection Object | 10cm*10cm(White Paper) | ||
| Detection Distance | 40cm | 2m | 5m |
| Light Source | 850nm Infrared modulated light | ||
| Operating Voltage | 12-24 VDC+/-10% | ||
| Response Time | 0.3ms Max. | ||
| Current Consumption | 15mA Max. | ||
| Load current | 100mA Max at 24 VDC | ||
| Insulation Resistance | 20M Ohm Min. at 500 VDC | ||
| Dielectric strength | 60 seconds at 1000VAC 60HZ; | ||
| Protection Degree | IP66 | ||
| Operating Temperature | -10℃-50℃;(No Icing) | ||
| Reverse Polarity Protection | Yes | ||
| Short Circuit Protection | Yes | ||
| Material | ABS | ||
| Wire Method | dia4*2M/-3wires | ||
| Weight | 107g | ||